MyJournals Home  

RSS FeedsMaterials, Vol. 12, Pages 1682: Characterization of a Surface Hydrogen Charging Product Affecting the Mechanical Properties in 2205 Duplex Stainless Steel (Materials)

 
 

24 may 2019 04:01:06

 
Materials, Vol. 12, Pages 1682: Characterization of a Surface Hydrogen Charging Product Affecting the Mechanical Properties in 2205 Duplex Stainless Steel (Materials)
 


When 2205 duplex stainless steel (DSS) is immersed in simulated seawater under high hydrostatic pressure, or in an electrochemically hydrogen charged state, a spindle-shaped product is found in the ferrite phase that seriously deteriorates the mechanical properties of 2205 DSS. This paper systematically studied the composition, structure, and properties of the hydrogen charging product. The results of a slow strain rate tensile test show that the hydrogen charging product evidently reduces the elongation of 2205 DSS, and microcracks mainly initiate at the interface between the hydrogen charging product and the ferrite matrix at either a low or a high strain rate. However, the elongation recovers to that of the hydrogen free sample after heating the sample at 300 °C for 0.5 h. The nano-hardness and reduced modules of the product are higher than those of the ferrite and austenite phases. An element analysis by energy dispersive spectroscopy (EDS) and secondary ion mass spectrometry (SIMS) indicates that the Ni and H contents in the hydrogen charging product are higher than in the normal ferrite area, and X-ray diffraction shows the characteristic peak of iron hydride at 40.07°. Moreover, a differential scanning calorimeter (DSC) test demonstrated that the phase decomposition temperature of the product is 268 °C, which coincides with the fact that it dissolves at a high temperature caused by the focused electron beam during transmission electron microscopy (TEM) analysis. All experimental results indicate that the hydrogen charging product is a hydride of FeH or (Fe, Ni)H.


 
98 viewsCategory: Chemistry, Physics
 
Materials, Vol. 12, Pages 1683: Room-Temperature Creep Behavior and Activation Volume of Dislocation Nucleation in a LiTaO3 Single Crystal by Nanoindentation (Materials)
Materials, Vol. 12, Pages 1681: Research on Recognition Technology of Aluminum Profile Surface Defects Based on Deep Learning (Materials)
 
 
blog comments powered by Disqus


MyJournals.org
The latest issues of all your favorite science journals on one page

Username:
Password:

Register | Retrieve

Search:

Physics


Copyright © 2008 - 2024 Indigonet Services B.V.. Contact: Tim Hulsen. Read here our privacy notice.
Other websites of Indigonet Services B.V.: Nieuws Vacatures News Tweets Nachrichten