Energies, Vol. 12, Pages 3881: Experimental Study on Water Shutoff Technology Using In-Situ Ion Precipitation for Gas Reservoirs (Energies)

Once a gas well begins to produce water, gas production will be seriously affected. If no effective measures are taken, the gas well will be shut down. Although some methods can be adopted to limit the production of unwanted water in gas reservoirs, they do not radically solve the problem of excessive water production, which may cause gas shutoff and dramatically increase the cost of dealing with disposing of the unwanted water. In this study, water shutoff technology with in-situ ion precipitation was tested for a gas well in southwest China, with results demonstrated through experiments of ion precipitation distribution and core displacement. The results of the ion precipitation distribution experiments show that it can be artificially controlled to produce ion precipitation blocking the water layer. The distribution of ion precipitation depends on influencing factors including injection flow rate, injection height, and ion concentration, which is generally hill-shaped. Dynamic displacement experiments through two types of cores (matrix core and fracture core) show that during the process of injecting gas-field water into the core, the ion precipitation caused by the in-situ reaction constantly blocked the seepage channel, resulting in a significant decrease in the injection rate. After injection of the gas-field water, the permeability of the core decreased, the starting pressure gradient increased, and the effect of water shutoff was remarkable. Given the experimental results, the in-situ ion precipitation water-plugging technology for gas reservoirs can directly solve the problem of water production in gas wells in the water layer because it can block the water layer by using formation water itself. This technology has promise for use in southwest China and can provide technical guidance for other gas reservoirs.