Materials, Vol. 13, Pages 516: Innovative Coatings Based On Peppermint Essential Oil on Titanium and Steel Substrates: Chemical and Mechanical Protection Ability (Materials)

A coating that was made of peppermint essential oil was obtained on different metal substrates: Ti6Al4V alloy (mechanically polished and chemically etched) and 316L stainless steel (mechanically polished and mechanically ground). The final aim is to get a multifunctional (chemical and mechanical) protection of metal surfaces in contact with water media. The coatings were characterized by means of fluorescence microscopy, contact angle measurements, and Fourier Transformed Infrared spectroscopy (FTIR) spectroscopy. The chemical stability of the coatings was tested by means of soaking in water for different times (up to seven days) and washing with different alkaline or acidic solutions. The mechanical adhesion of the coating was tested by tape adhesion test (before and after soaking) and scratch tests to verify whether it has protection ability with respect to the metal substrate. All of the performed characterizations show that the coatings are chemically stable on all of the substrates and are nor dissolved or removed by water during soaking or by alkaline solutions during washing. The adhesion is high and classified as 4B or 5B (on the chemically etched or mechanically ground substrates) according to ASTM D3359-97, depending on the substrate roughness, both before and after soaking. In the case of scratch test (up to 10 N), the coating is not removed and it has a protection action that is able to avoid the surface damage, even if the substrate has a plastic deformation.