MyJournals Home  

RSS FeedsEnergies, Vol. 13, Pages 936: Computational Modeling and Empirical Analysis of a Biomass-Powered Drinking Water Pasteurization Technology (Energies)

 
 

19 february 2020 18:02:51

 
Energies, Vol. 13, Pages 936: Computational Modeling and Empirical Analysis of a Biomass-Powered Drinking Water Pasteurization Technology (Energies)
 


While filtration, chlorination, and UV drinking water treatments are commonplace, globally an estimated 1.2 billion people continue to boil their drinking water over inefficient biomass fires instead because it allows them to use available resources paired with a time-tested and trusted method. Although boiling water is culturally well-established, there is vast potential to improve human health, environmental impact, and efficiency by leveraging the fact that a significant reduction in pathogenic microorganisms occurs at temperatures well below boiling through a process known as pasteurization. This paper presents the evaluation of a community-scale, biomass-powered, flow-through water pasteurization system that was designed to heat water to the temperature required for pasteurization to occur before recuperating heat while cooling treated water down to a safe-to-handle temperature. The system is then compared to other common thermal treatment methods including batch-boiling over open fires and improved cookstoves. Results from computational modeling and empirical analysis show that the water pasteurizer significantly increases the overall water treatment capacity (from 7.9 to 411 L/h, adjusted for one hour of treatment via household boiling and operation of the water pasteurizer at steady-state, respectively) and uses far less biomass fuel (from 22 to 5.5 g/L, adjusted for treatment of 1 L of water via household boiling and operation of the water pasteurizer at steady-state, respectively). Notable comparisons to the batch-boiling of water over institutional-sized traditional and improved cookstoves are also demonstrated. Further, the results of fecal indicator reduction through the system (8 log and 6 log reduction of E. coli and bacteriophage MS2, respectively) suggest compliance with US-EPA (6 log and 4 log reduction of E. coli and bacteriophage MS2, respectively) and WHO requirements (effluent concentrations below the detection limit, specified as <1 E. coli CFU/100 mL and <10 bacteriophage MS2 PFU/mL) for the reduction in and effluent concentration of E. coli and bacteriophage for water treatment processes. It is recommended that engineers continue to explore the use of heat transfer and microorganism reduction theory to design technologies that increase the capacity and efficiency for thermal water purification that uses locally-available biomass resources.


 
160 viewsCategory: Biophysics, Biotechnology, Physics
 
Energies, Vol. 13, Pages 938: Construction Diversion Risk Assessment for Hydropower Development on Sediment-Rich Rivers (Energies)
Energies, Vol. 13, Pages 935: Application of VMD and Hilbert Transform Algorithms on Detection of the Ripple Components of the DC Signal (Energies)
 
 
blog comments powered by Disqus


MyJournals.org
The latest issues of all your favorite science journals on one page

Username:
Password:

Register | Retrieve

Search:

Physics


Copyright © 2008 - 2024 Indigonet Services B.V.. Contact: Tim Hulsen. Read here our privacy notice.
Other websites of Indigonet Services B.V.: Nieuws Vacatures News Tweets Nachrichten