Entropy, Vol. 23, Pages 1355: Numerical Prediction of Two-Phase Flow through a Tube Bundle Based on Reduced-Order Model and a Void Fraction Correlation (Entropy)

Predicting the void fraction of a two-phase flow outside of tubes is essential to evaluate the thermohydraulic behaviour in steam generators. Indeed, it determines two-phase mixture properties and affects two-phase mixture velocity, which enable evaluating the pressure drop of the system. The two-fluid model for the numerical simulation of two-phase flows requires interaction laws between phases which are not known and/or reliable for a flow within a tube bundle. Therefore, the mixture model, for which it is easier to implement suitable correlations for tube bundles, is used. Indeed, by expressing the relative velocity as a function of slip, the void fraction model of Feenstra et al.and Hibiki et al. developed for upward cross-flow through horizontal tube bundles is introduced and compared. With the method suggested in this paper, the physical phenomena that occur in tube bundles are taken into consideration. Moreover, the tube bundle is modelled using a porous media approach where the Darcy–Forchheimer term is usually defined by correlations found in the literature. However, for some tube bundle geometries, these correlations are not available. The second goal of the paper is to quickly compute, in quasi-real-time, this term by a non-intrusive parametric reduced model based on Proper Orthogonal Decomposition. This method, named Bi-CITSGM (Bi-Calibrated Interpolation on the Tangent Subspace of the Grassmann Manifold), consists in interpolating the spatial and temporal bases by ITSGM (Interpolation on the Tangent Subspace of the Grassmann Manifold) in order to define the solution for a new parameter. The two developed methods are validated based on the experimental results obtained by Dowlati et al. for a two-phase cross-flow through a horizontal tube bundle.