Energies, Vol. 14, Pages 6831: Design of a Pendulum Prototype for Dynamic Testing of Material Removal Using Picks (Energies)

The need for large and fast excavations, together with noise and vibration limitations, means that mechanical removal is increasingly used rather than blasting. In mechanical removal, the cutting tools hit the rock and penetrate it, and then move in the direction of cutting, dragging and detaching a portion of rock called chip. Most research on mechanical removal approaches it as a static process without taking into account the speed at which the cutting element impacts the rock. This work presents the design of a pendulum equipment capable of simulating the impact of a cutting element, specifically a pick, against a rock, reproducing the removal in a similar way to how it is carried out in real excavations. Cutting tests are carried out with concrete samples with a cement/sand ratio of 1:1 and 3:1, the volume of material that is removed is calculated using a 3D scanner and images of the tests are collected with a high-speed video camera to facilitate the interpretation of the results. The results confirm the direct relationship between impact energy, chip size and cutting depth, prove the formation of an affected zone that allows to reduce the cutting energy, and empirically obtain the optimum cutting energy with which the maximum performance in mechanical removal would be achieved.