Energies, Vol. 15, Pages 5757: Analysis of the Impact of Propanol-Gasoline Blends on Lubricant Oil Degradation and Spark-Ignition Engine Characteristics (Energies)

Alcoholic fuels have recently come to light as a sustainable source for powering today’s vehicles. Various studies have investigated the effects of alcoholic fuels on engine efficiency and emission characteristics. However, scarce literature is available for their effects on lubricant. Therefore, propanol-gasoline fuel mixtures, with concentrations of 9% (P9) and 18% (P18) propanol, were made to compare their engine characteristics and lubricating oil condition with that of pure gasoline (0 percent propanol (P0)). To determine the rate of deterioration, the characteristics of the lubricating oil were evaluated after 100 h of engine operation, as suggested by the manufacturer. When compared with unused lube oil, P18 showed reductions in flash point temperature and kinematic viscosity of 14% and 36%, respectively, at 100 °C. For P18, which contains Fe (27 PPM), Al (11 PPM), and Cu (14 PPM), the highest wear element concentrations in the lubricating oil were found. The moisture in the degraded oil was well within the allowable limit for the three fuel mixtures. With the increase in propanol percentage in the propanol-gasoline blend, the engine performance was increased. Compared to P9 and P0, P18 had the partially unburned emissions.