Algorithms, Vol. 15, Pages 464: Error Investigation on Wi-Fi RTT in Commercial Consumer Devices (Algorithms)

Researchers have explored multiple Wi-Fi features to estimate user locations in indoor environments in the past decade, such as Received Signal Strength Indication (RSSI), Channel State Information (CSI), Time of Arrival (TOA), and Angle of Arrive (AoA). Fine Time Measurement (FTM) is a protocol standardized by IEEE 802.11-2016, which can estimate the distance between the initiator and the station using Wi-Fi Round-Trip Time (RTT). Promoted by Google, such a protocol has been explored in many mobile localization algorithms, which can provide meter-level positioning accuracy between Wi-Fi RTT-enabled smartphones and access points (APs). However, previous studies have shown that the Wi-Fi RTT measurements are sensitive to environmental changes, which leads to significant errors in the localization algorithms. Such an error usually varies according to different environments and settings. Therefore, this paper investigates the error in Wi-Fi RTT distance measurements by setting multiple experiments with different hardware, motion status, and signal path loss conditions. The experiment results show that four categories of errors are found in RTT distance measurements, including hardware-dependent bias, blocker-dependent bias, fluctuations, and outliers. Comparison and analysis are carried out to illustrate the impact of the different errors on Wi-Fi RTT distance.