Energies, Vol. 16, Pages 2832: Research on the Ignition Process and Flame Stabilization of a Combination of Step and Strut: Experimental and Numerical Study (Energies)

A combined application of step and strut was put forward to achieve reliable ignition and flame stabilization. In this work, the ignition process and temperature distribution have been tested, and a new reduction approach applied to jet fuel oxidation mechanism was developed to present a flow map via tracking C and H reaction paths, then the minor and major reactions were verified according to relative occurrence probabilities. With the half decrease of mechanism size, bias occurred and was controlled within 1.8%. This reduction method had such characteristics as universality, intuition, and quantification, due to its inherent simplification theory. This simulation of ignition process was always consistent with experimental results, which depicted kernel generation, flamelet breakup and flame propagation. Also, the influence of inlet temperature on outlet temperature and component distribution was performed, the biases of experimental and numerical results were within 5%. Chemical characteristics of Kerosene/air premixed combustible had changed and side reactions occurred to jet fuel above 900 K, which led to a converse effect on flame spreading. The side reactions aggravated the increasing coproducts of CO and CH4, which caused the decrease of volumetric heat production.