Materials, Vol. 11, Pages 1024: Effects of Different Hot Working Techniques on Inclusions in GH4738 Superalloy Produced by VIM and VAR (Materials)

Hot working is a key process in the production of superalloys; however, it may result in the formation of inclusions that affect the superalloy performance. Therefore, the effects of hot working on inclusions in a superalloy must be studied. GH4738 superalloy was manufactured, herein, by vacuum induction melting and vacuum arc remelting. Hot working was performed by unidirectional drawing, upsetting and drawing, and upsetting/drawing with radial forging. The types and distributions of inclusions after these three hot working processes and those in an original ingot were analyzed using scanning electron microscopy, energy dispersive spectroscopy, and Image-Pro Plus software. The results showed that the melting technology essentially determined the inclusion types in GH4738. Four types of inclusions were found in the experiments: TiC–TiN–Mo–S composite, TiC–TiN composite, Ce–Mo–S composite, and SiC inclusions. In the case of hot working by unidirectional drawing, the average inclusion size first decreased, and then increased from the center to the edge. In the case of upsetting and drawing, and upsetting/drawing with radial forging, the average inclusion size decreased from the center to the edge.