Materials, Vol. 11, Pages 2255: Multiscale Analysis of CFRP Laminates with MMF3 Criterion under Different Off-Axis Loading Conditions (Materials)

A multiscale analysis strategy with physical modified-micromechanics of failure (MMF3) criterion was proposed to analyze the failure behaviors of carbon fiber reinforced plastic (CFRP) laminates. The quantitative relationship between the macro- and micro- stresses was determined considering two typical fiber distributions. Thermal residual stress was taken into account in the stress transformation. The failures were defined and the properties of damaged elements were degraded at the constituent level. The back-calculation method based on the iteration algorithm was proposed to determine the micro strength with macro mechanical tests. A series of off-axis loading tests were conducted to verify the established multiscale models. The predicted strength was also compared with the results using micromechanics of failure (MMF) criterion to present accuracy improvements. Thermal residual stress was found to affect the strength by contributing to the matrix damage status. Meanwhile, sensitivity analysis was provided for the matrix-dominant micro strength to investigate its physical meaning. Results suggest that the micro tensile and compressive strength of the matrix influenced the off-axis tensile and compressive strengths respectively, with relative large off-axis angles, while the micro shear strength of the matrix dominated when the off-axis angles were relative small.