Materials, Vol. 11, Pages 2496: Regulation of Substrate-Target Distance on the Microstructural, Optical and Electrical Properties of CdTe Films by Magnetron Sputtering (Materials)

Cadmium telluride (CdTe) films were deposited on glass substrates by direct current (DC) magnetron sputtering, and the effect of substrate-target distance (Dts) on properties of the CdTe films was investigated by observations of X-ray diffraction (XRD) patterns, atomic force microscopy (AFM), UV-VIS spectra, optical microscopy, and the Hall-effect measurement system. XRD analysis indicated that all samples exhibited a preferred orientation along the (111) plane, corresponding to the zinc blende structure, and films prepared using Dts of 4 cm demonstrated better crystallinity than the others. AFM studies revealed that surface morphologies of the CdTe films were strongly dependent on Dts, and revealed a large average grain size of 35.25 nm and a high root mean square (RMS) roughness value of 9.66 nm for films fabricated using Dts of 4 cm. UV-VIS spectra suggested the energy band gap (Eg) initially decreased from 1.5 to 1.45 eV, then increased to 1.68 eV as Dts increased from 3.5 to 5 cm. The Hall-effect measurement system revealed that CdTe films prepared with a Dts of 4 cm exhibited optimal electrical properties, and the resistivity, carrier mobility, and carrier concentration were determined to be 2.3 × 105 ?·cm, 6.41 cm2·V−1·S−1, and 4.22 × 1012 cm−3, respectively.