IJMS, Vol. 19, Pages 4082: The Retentive Strength of Laser-Sintered Cobalt-Chromium-Based Crowns after Pretreatment with a Desensitizing Paste Containing 8% Arginine and Calcium Carbonate (International Journal of Molecular Sciences)

The retention of laser-sintered cobalt-chromium (Co-Cr)-based crowns were examined after dentin pretreatment with desensitizing paste containing 8% arginine and calcium carbonate (DP-ACC). Forty lower first molars were prepared using a standardized protocol. The Co-Cr crowns were produced using selective laser melting. The teeth were either pretreated with the desensitizing paste or not pretreated. After one week, each group was cemented with glass ionomer cement (GIC) or zinc phosphate cement (ZPC). Surface areas of the teeth were measured before cementation. After aging, a universal testing machine was used to test the retentive strength of the cemented crown-tooth assemblies. The debonded surfaces of the teeth and crowns were examined at 2.7× magnification. Pretreating the dentin surfaces with the desensitizing paste before cementation with GIC or ZPC did not affect the retention of the Co-Cr crowns. The retention of the GIC group (6.04 ± 1.10 MPa) was significantly higher than that of the ZPC group (2.75 ± 1.25 MPa). The predominant failure mode for the ZPC and the nontreated GIC group was adhesive cement-dentin failure; for the treated GIC group, it was adhesive cement-crown failure. The desensitizing paste can be safely used to reduce post-cementation sensitivity without reducing the retentive strength of Co-Cr crowns cemented with GIC or ZPC.