Energies, Vol. 14, Pages 6900: Numerical Investigation on the Performance of Two-Throat Nozzle Ejectors with Different Mixing Chamber Structural Parameters (Energies)

In this study, the effects of the mixing chamber diameter (Dm), mixing chamber length (Lm) and pre-mixing chamber converging angle (θpm) were numerically investigated for a two-throat nozzle ejector to be utilized in a CO2 refrigeration cycle. The developed simulated method was validated by actual experimental data of a CO2 ejector in heat pump water heater system from the published literature. The main results revealed that the two-throat nozzle ejectors can obtain better performance with Dm in the range of 8–9 mm, Lm in the range of 64–82 mm and θpm at approximately 60°, respectively. Deviation from its optimal value could lead to a poor operational performance. Therefore, the mixing chamber structural parameters should be designed at the scope around its optimal value to guarantee the two-throat nozzle ejector performance. The following research can be developed around the two-throat nozzle geometries to strengthen the ejector performance.