Energies, Vol. 15, Pages 5792: Heat Transfer during Nitrogen Boiling on Surfaces Modified by Microarc Oxidation (Energies)

Despite the many different methods for creating modified heat transfer surfaces to increase critical heat fluxes and heat transfer coefficients at pool boiling of various liquids at given reduced pressures, active research is currently underway to find optimal surface morphology and geometric parameters of structures for practical application. In this work, we used the method of microarc oxidation (MAO) to obtain coatings with different microstructures on the surface of duralumin heaters. In the present work, we studied the effect of MAO coatings on heat transfer, critical heat flux, and evaporation dynamics during liquid nitrogen boiling under conditions of steady-state heat release at pressures of 0.1, 0.05, and 0.017 MPa. It was shown that the modification of heaters led to a 50–60% increase in heat transfer coefficients as compared to the smooth one under the atmospheric pressure. Based on the data of high-speed video filming of boiling, it was shown that the main mechanism of intensification is the increase in quantity of active nucleation sites. A significant decrease in pressure led to the absence of a significant difference in both heat transfer intensity and evaporation dynamics for the smooth and modified heaters.