Energies, Vol. 15, Pages 8899: Fast Fault Detection and Active Isolation of Bidirectional Z-Source Circuit Breaker with Mechanical Switch (Energies)

In this paper, a new design is provided so that the Z-source circuit breaker with a mechanical switch operates quickly at a low-impedance fault. When the fault occurs, the Z-source circuit breaker uses an impedance network to generate forced current zero crossing on the switch. This current zero-crossing time is not sufficient when mechanical switches are applied. In addition, since the MS switch operates through the fault detection sensor, the speed is slowed down. At a slower speed, the circuit breaker may not allow fault current isolation. To solve this problem, the Thomson coil was added to the circuit. It operates immediately in a low-impedance fault without additional fault detection devices. As a result, the faster operating speed is expected to reduce the size of the Z-source circuit breaker component and the stress of the breaker. It is mathematically analyzed and derived, and verified through simulations and experiments. The main features of the proposed model are fast detection and operation, normal-state circuit disconnect, fault current limitation, and low conduction loss.